Winch Cable

Home > Uncategorized > Winch Cable

September 7th, 2010 admin Leave a comment Go to comments

Winch Cable

What You Need to Know About Cable Jetting

For many years, cable pulling was the only reasonable way to install cable in ducts and other conduits. Pull lines had to be used, and ducts and conduits ideally had as few bends and turns as possible. The process was imperfect, to say the least. Today, cable jetting has made installing cable in a conduit much easier to do. Professionals like CLP regularly use jetting in order to be more efficient. Learn more about cable jetting below.

How it Works:

With cable jetting, a cable is blown through a duct with compressed air. At the same time, it is pushed into a duct mechanically. Special lubricants are used to make the process more effective. On one end of a duct, compressed air is injected at a very high rate of speed. The air then surges throughout the duct along the side of the cable, launching it with a balance of drag force and pressure drop.

Since airflow is evenly distributed around the cable, friction is kept to a minimum. The use of specialized lubrication further lowers the amount of friction, which means the process develops more efficiently overall. At the same time, damages to the cable are very unlikely. Thanks to the force of the air, the pushing and the low friction, jetting can be effectively used even in situations where ducts and conduits have many bends and turns. Because the force of air can sometimes be really high at the exhaust end of a conduit, jetting equipment exudes pushing power to the cable concurrently.

The Benefits of Cable Jetting:

Cable jetting brings many prime benefits to the table. They include:

> Lower forces are exerted on the cable that's being installed. This reduces the likelihood of damages, keeping costs low. This is especially important in the case of very sensitive cables.

> Longer installation distances can be achieved. This can considerably lower the time you need to complete any given project, saving you time and money, making it ultimately far more efficient. Furthermore, it simplifies the logistics of the job and generally requires fewer workers.

> A winch rope is not needed when cable jetting is used. Less equipment means less hassle for everybody.

> Equipment only needs to be used at one end of a duct route. This makes preparation times much shorter, allowing the job to be underway in a shorter period of time.

> Cable can be installed in conduits that have several bends and turns, in a much easier way. Most certainly, cable jetting is an excellent method for installation of cabling within ducts and conduits, of almost any shape, size or configuration. CLP has everything that you need to perform cable jetting. There are many advantages and benefits to using cable jetting to install cable. If the conduit that you'll be installing it in has many bends and turns, cable jetting can handle it with gusto. When the job needs to be done fast, cable jetting is the way to go.

About the Author

CLP
has everything that you need to perform cable jetting. There are many advantages and benefits to using cable jetting to install cable. When the job needs to be done fast, cable jetting with the help of
CLP
is the way to go. See Cable Laying Products.